DEVICE PROVISIONING / Anthropic
M5Stack onboarding
Pins the M5 onboard skill, which will not guess a serial port or continue a native-USB flash until the user confirms download mode.
“End-to-end onboarding for a freshly-plugged-in M5Stack ESP32 device (Cardputer, Cardputer-Adv, Core, CoreS3, Stick) — detect on USB, flash UIFlow 2.0 firmware, and install the Claude Buddy MicroPython app bundle. Use whenever the user plugs in or wants to flash/provision/reset an M5Stack or ESP32 board, or says "m5-onboard go".”
01 / THE REASONING
Why this made the selection.
- If more than one board is connected, the skill says to ask which port to target and not to guess, and a bare Cardputer must be asked apart from Cardputer-Adv because the wrong image boot-loops the device.
- Native-USB flash has no software path into download mode: the agent must stop until the user confirms the screen is dark, and it must not retry the script, unplug the device, or raise the baud rate to 921600.
02 / THE REVIEW RECORD
What we actually inspected.
Source review has boundaries.
A clear record is more useful than a “safe” badge.
Material inspected
- plugins/cwc-makers/skills/m5-onboard/SKILL.md
- plugins/cwc-makers/README.md
- plugins/cwc-makers/LICENSE
- README.md
- LICENSE
Our findings
- Several connected boards are not assigned a port by guessing; the skill says to ask.
- A user who says Cardputer without Adv must be asked, because that image is not the Cardputer-Adv default and the wrong image boot-loops the board.
- Native-USB download mode needs the physical button sequence. The agent must not continue, retry the script, or use a software reset until the user confirms the screen is dark.
- The device must not be unplugged during flash, and the baud rate must not be raised to 921600.
- DTR/RTS automation is rejected for native USB, and an NVS boot option must be written with set_str rather than set_blob.
- A missing esptool prompts before install. A missing Homebrew install is offered only after the user confirms. A piped caller gets a hint instead of that prompt.
Not established by this review
- The resource was not executed, and no board was detected, flashed, or rebooted.
- esptool, Python, and Homebrew were not installed.
- The moremas/build-with-claude clone, references/hardware_signatures.md, and references/uiflow2_nvs.md were not opened.
- Not executed: it was not installed or run.
The review applies to the material and revision named here. A newer upstream release can change its behavior.
03 / PUT IT TO WORK
Add a skill to your workflow.
DOCUMENTED COMMAND
/plugin install cwc-makers@claude-plugins-official Copying does not execute this command. It may retrieve a newer version than the reviewed source.
- The cwc-makers README shows `/plugin install cwc-makers@claude-plugins-official`. That installs the plugin, not this file alone.
- The skill says the scripts run from a local clone of moremas/build-with-claude, which the maker-setup command creates. This review did not clone that repository.
- This review did not run the install line or any onboard script.
Before you start
- A Python interpreter on the host, because the skill says the scripts cannot bootstrap one
- A local moremas/build-with-claude clone, because the skill says the scripts and buddy bundle live there
- USB access to the board; on Linux the skill names the dialout or uucp group before the port can be opened
04 / FOLLOW THE EVIDENCE
The source trail.
Our notes are separate from the original resource.
Check upstream before adopting a new version.
- m5-onboard SKILL.md ↗Checked
https://github.com/anthropics/claude-plugins-official/blob/41f32e407b450055044f167db7ded5e8ff67d203/plugins/cwc-makers/skills/m5-onboard/SKILL.md
Supports: port question, Cardputer variant question, download-mode confirmation, and the flash stop rules
- cwc-makers README ↗Checked
https://github.com/anthropics/claude-plugins-official/blob/41f32e407b450055044f167db7ded5e8ff67d203/plugins/cwc-makers/README.md
Supports: Apache-2.0 statement and the cwc-makers plugin install line
- cwc-makers LICENSE ↗Checked
https://github.com/anthropics/claude-plugins-official/blob/41f32e407b450055044f167db7ded5e8ff67d203/plugins/cwc-makers/LICENSE
Supports: Apache License, Version 2.0
- Repository README ↗Checked
https://github.com/anthropics/claude-plugins-official/blob/41f32e407b450055044f167db7ded5e8ff67d203/README.md
Supports: The licence section says to see each plugin's LICENSE file
- Repository LICENSE ↗Checked
https://github.com/anthropics/claude-plugins-official/blob/41f32e407b450055044f167db7ded5e8ff67d203/LICENSE
Supports: Apache License, Version 2.0
https://raw.githubusercontent.com/anthropics/claude-plugins-official/41f32e407b450055044f167db7ded5e8ff67d203/plugins/cwc-makers/skills/m5-onboard/SKILL.md
Supports: upstreamDescription, review.notTested, review.reviewedAt
https://raw.githubusercontent.com/anthropics/claude-plugins-official/41f32e407b450055044f167db7ded5e8ff67d203/plugins/cwc-makers/README.md
Supports: install.command