---
title: "Prisma Compute: review, setup & limitations · Undominated.ai"
canonical: https://undominated.ai/skills/prisma-prisma-compute/
description: "Pins Prisma's Compute skill, which checks auth before app mutations and separates a non-promoting build from a production deploy."
---

# Prisma Compute: review, setup & limitations · Undominated.ai

> Pins Prisma's Compute skill, which checks auth before app mutations and separates a non-promoting build from a production deploy.

[← Explore all skills](/skills/)

APPLICATION DEPLOYMENT / Prisma

# Prisma Compute

Pins Prisma's Compute skill, which checks auth before app mutations and separates a non-promoting build from a production deploy.

 [See setup guidance ↓](#setup)[Original source ↗](https://github.com/prisma/skills/tree/be16a8740d01363d13552b317042431ee8dfc581/prisma-compute)

SOURCE REVIEW

 Reviewed 2026-10-15
 Evidence 4 linked sources
 Publisher Prisma
 Licence [MIT ↗](https://github.com/prisma/skills/blob/be16a8740d01363d13552b317042431ee8dfc581/LICENSE)
 Revision be16a8740d01
 [Read what was—and wasn’t—checked ↓](#review)

“Prisma Compute deployment and hosting guide. Use whenever the user mentions Prisma Compute, `prisma.compute.ts`, `defineComputeConfig`, deploying or hosting a Prisma app, `@prisma/cli app deploy`, `compute:deploy`, `create-prisma --deploy`, `PRISMA_SERVICE_TOKEN`, Compute auth/workspaces, apps/deployments/build logs/domains, localhost vs `0.0.0.0`, deploy port binding, or framework deploy readiness for Hono, Elysia, Next.js, TanStack Start, Astro, Nuxt, Svelte, Nest, Turborepo, or custom/prebuilt artifacts.”

 [Prisma · upstream description ↗](https://github.com/prisma/skills/blob/be16a8740d01363d13552b317042431ee8dfc581/prisma-compute/SKILL.md) Our analysis follows below.

01 / THE REASONING

## Why this made the selection.

 - A non-empty service token is the auth source, an empty token should fail closed, and a failed workspace must not fall through to another cached session.
- init will not deploy over an existing config, --prod --yes is only for an intended production deploy, and --no-promote leaves the live deployment untouched.

### A good fit for

 - Deploying an existing TypeScript app to Prisma Compute after the active workspace or service token is identified

### Weigh up before choosing

 - This review did not execute the resource.
- `npx skills add prisma/skills --skill prisma-compute` installs the named skill. A different README line, `npx skills add prisma/skills`, installs every skill in the repository.
- The references/ directory was not opened. Several rules describe what the CLI should do; this review did not run the CLI.
- The skill frontmatter version is 1.5.1. That is a version token, not a test result.
- The source states that the first production deployment of an app auto-promotes without --prod; it documents --no-promote for building a candidate without touching the live deployment.

02 / THE REVIEW RECORD

## What we actually inspected.

Source review has boundaries. A clear record is more useful than a “safe” badge.

### Material inspected

 - prisma-compute/SKILL.md
- README.md
- LICENSE

### Our findings

 - A non-empty PRISMA_SERVICE_TOKEN overrides local OAuth, and an empty token should fail instead of falling back.
- If the active OAuth workspace fails refresh, the CLI should not silently use another cached workspace.
- Logging out one workspace is separate from plain auth logout, which clears every local OAuth session.
- While a service token is set, auth workspace use is unavailable until that variable is unset.
- init refuses when any config already exists, and it does not scaffold or deploy.
- A non-promoting deploy builds a candidate without touching the live deployment, and the production flag is only for an intended production deploy.
- Secrets are not printed or committed in prisma.compute.ts, and a placeholder database URL is not deployed.

### Not established by this review

 - The resource was not executed and no Prisma CLI command was run.
- No app was deployed, promoted, or logged out.
- references/app-deploy-cli.md, compute-config.md, frameworks.md, create-prisma.md, sdk-api.md, and troubleshooting.md were not opened.
- Not executed: it was not installed or run.

The review applies to the material and revision named here. A newer upstream release can change its behavior.

03 / PUT IT TO WORK

## Add a skill to your workflow.

[Upstream setup instructions ↗](https://github.com/prisma/skills/blob/be16a8740d01363d13552b317042431ee8dfc581/README.md)

DOCUMENTED COMMAND

 npx skills add prisma/skills --skill prisma-compute Copy command ↗

Run in your terminal to choose your AI tools, project or global scope, and installation method. This short command follows the current upstream version; the review covers the revision shown above.

 - The repository README lists `npx skills add prisma/skills --skill prisma-compute` under specific-skill installs.
- The same README also shows `npx skills add prisma/skills`, which installs all skills. That is not the command recorded here.
- This review did not run either command.

### Before you start

 - npx, because the README install line uses npx
- A Prisma service token or a stored OAuth workspace, as the skill describes before project or app mutations

### Compatibility

Agent Skills format

### Implementation

TypeScript

### Local skill text; Compute apps change only if an operator runs the CLI

 - Read the skill text
- Use a service token or local OAuth workspace only if the operator authenticates
- Deploy, promote, or roll back only if the operator runs those commands

### Cost model

MIT; no Prisma CLI command was run

04 / FOLLOW THE EVIDENCE

## The source trail.

Our notes are separate from the original resource. Check upstream before adopting a new version.

 - [prisma-compute SKILL.md ↗](https://github.com/prisma/skills/blob/be16a8740d01363d13552b317042431ee8dfc581/prisma-compute/SKILL.md) Checked 2026-10-14 https://github.com/prisma/skills/blob/be16a8740d01363d13552b317042431ee8dfc581/prisma-compute/SKILL.md Supports: service-token precedence, no workspace fallthrough, init refusal, and production versus no-promote deploys
- [Repository README ↗](https://github.com/prisma/skills/blob/be16a8740d01363d13552b317042431ee8dfc581/README.md) Checked 2026-10-14 https://github.com/prisma/skills/blob/be16a8740d01363d13552b317042431ee8dfc581/README.md Supports: the prisma-compute install line and the MIT statement
- [Repository LICENSE ↗](https://github.com/prisma/skills/blob/be16a8740d01363d13552b317042431ee8dfc581/LICENSE) Checked 2026-10-14 https://github.com/prisma/skills/blob/be16a8740d01363d13552b317042431ee8dfc581/LICENSE Supports: MIT License
- [Pinned source review C2-W33 ↗](https://raw.githubusercontent.com/prisma/skills/be16a8740d01363d13552b317042431ee8dfc581/prisma-compute/SKILL.md) Checked 2026-10-15 https://raw.githubusercontent.com/prisma/skills/be16a8740d01363d13552b317042431ee8dfc581/prisma-compute/SKILL.md Supports: upstreamDescription, limitations, review.notTested, review.reviewedAt

KEEP COMPARING

## Other approaches to consider.

Related by category or shared topics. These are alternatives to inspect, not a measured quality order.

 [### Azure compliance and security audit ↗ Pins Microsoft's Azure compliance skill, which requires az login before an azqr or Key Vault expiration review and separates the report from remediation.](/skills/microsoft-azure-compliance/)[### Azure Identity library for .NET ↗ Microsoft's .NET guide to choosing an Azure.Identity credential: DefaultAzureCredential while developing, a specific managed identity in production, plus service principal, developer and sovereign-cloud options.](/skills/microsoft-azure-identity-dotnet/)[### Azure Identity library for Rust ↗ Microsoft's Rust guide to azure_identity, which has no DefaultAzureCredential: DeveloperToolsCredential for local work, ManagedIdentityCredential for Azure-hosted code and ClientSecretCredential for service principals.](/skills/microsoft-azure-identity-rust/)

 [AI Tools ↗](/tools/)[Skills ↗](/skills/)[Agents ↗](/agents/)[MCP Servers ↗](/mcp-servers/)[Workflows ↗](/workflows/)

## Continue your investigation

 - [Choose a toolkit](/tools/)
- [Inspect execution hosts](/agents/)
- [Check tool access](/mcp-servers/)
- [Check project dependencies](/check-repo/)
