---
title: "AKS network capture: review, setup & limitations · Undominated.ai"
canonical: https://undominated.ai/skills/microsoft-aks-network-capture/
description: "Pins Microsoft's AKS packet-capture skill, which will not claim a capture ran unless the host gate passes and which separates capture intent from debug-container consent."
---

# AKS network capture: review, setup & limitations · Undominated.ai

> Pins Microsoft's AKS packet-capture skill, which will not claim a capture ran unless the host gate passes and which separates capture intent from debug-container consent.

[← Explore all skills](/skills/)

AKS PACKET CAPTURE / Microsoft

# AKS network capture

Pins Microsoft's AKS packet-capture skill, which will not claim a capture ran unless the host gate passes and which separates capture intent from debug-container consent.

 [See setup guidance ↓](#setup)[Original source ↗](https://github.com/microsoft/skills/tree/fc164ba1d7a0c10377dbcc1c9ac07253b9329fdb/.github/plugins/aks-skills/skills/aks-network-capture)

SOURCE REVIEW

 Reviewed 2026-10-15
 Evidence 6 linked sources
 Publisher Microsoft
 Licence [MIT ↗](https://github.com/microsoft/skills/blob/fc164ba1d7a0c10377dbcc1c9ac07253b9329fdb/LICENSE)
 Revision fc164ba1d7a0
 [Read what was—and wasn’t—checked ↓](#review)

“Collects bounded packet captures from AKS nodes and Azure network configuration for wire-level evidence. WHEN: "capture packets on an AKS node", "take a pcap", "run tcpdump on AKS", "prove where packets drop". Use for explicit packet-capture intent after read-only diagnostics, not general AKS connectivity or ingress troubleshooting.”

 [Microsoft · upstream description ↗](https://github.com/microsoft/skills/blob/fc164ba1d7a0c10377dbcc1c9ac07253b9329fdb/.github/plugins/aks-skills/skills/aks-network-capture/SKILL.md) Our analysis follows below.

01 / THE REASONING

## Why this made the selection.

 - The file says a governed Azure CLI tool does not authorize shell, kubectl, artifact storage, or packet capture, and it forbids routing kubectl through Azure MCP or adding an unapproved execution path.
- It says capture intent is not mutation consent, stops for separate approval before a debug-container fallback, and generates traffic only if that step is approved.

### A good fit for

 - Planning a bounded AKS packet capture after read-only checks, without treating a request to capture as consent to add a debug container
- Plan capture retrieval and Azure network evidence collection using the documented Bash or PowerShell paths.

### Weigh up before choosing

 - The resource was not executed.
- No standalone install line for this plugin appears in the fetched files. The aks-skills README embeds `/plugin install aks-skills@azure-skills` in a numbered line, so install.command is null. That plugin install is not this file alone.
- The repository README line `/plugin install azure@skills` installs a different plugin. The aks-skills README says this plugin is not installed automatically.
- The aks-skills README says capture skills do not start a packet capture or change resources without explicit approval, and that they use existing az and kubectl credentials.
- The aks-skills README says to install only on a trusted device because its telemetry hooks use npx, and telemetry is collected unless AZURE_MCP_COLLECT_TELEMETRY=false.
- references/capture-authorization.md and the bundled capture scripts were not opened, so this review does not restate their steps.

02 / THE REVIEW RECORD

## What we actually inspected.

Source review has boundaries. A clear record is more useful than a “safe” badge.

### Material inspected

 - .github/plugins/aks-skills/skills/aks-network-capture/SKILL.md
- README.md
- .github/plugins/aks-skills/README.md
- LICENSE
- .github/plugins/aks-skills/LICENSE

### Our findings

 - The skill is for an explicit packet capture after read-only checks, not for general AKS connectivity or ingress troubleshooting.
- If shell, kubectl, az, bundled scripts, or an approved artifact destination is unavailable, the file says to state that capture execution is unavailable and not to claim it ran.
- Azure MCP is described as supplying cluster and node-pool metadata, not Kubernetes command execution or packet capture.
- Authorization and target binding come before the capture workflow, and a debug-container fallback needs a separate approval.
- Test traffic is generated only if approved, and a missing capture is not treated as success.

### Not established by this review

 - The resource was not executed and its tools were not called.
- No packet capture, ConfigMap, debug container, or test traffic was started.
- The authorization note and bundled scripts were not opened.
- The aks-skills plugin was not installed.
- Not executed: it was not installed or run.

The review applies to the material and revision named here. A newer upstream release can change its behavior.

03 / PUT IT TO WORK

## Add a skill to your workflow.

[Upstream setup instructions ↗](https://github.com/microsoft/skills/blob/fc164ba1d7a0c10377dbcc1c9ac07253b9329fdb/.github/plugins/aks-skills/README.md)
 - The aks-skills README tells Copilot CLI users to add marketplace microsoft/azure-skills and then shows `/plugin install aks-skills@azure-skills` inside a numbered line. That installs the aks-skills plugin, not this file alone, and it is not a line by itself.
- The repository README's own lines are `/plugin marketplace add microsoft/skills` and `/plugin install azure@skills`. Those name the azure plugin, which this plugin README says is separate.
- The repository README also shows `npx skills add microsoft/skills`, which starts a wizard for the whole repository.

### Before you start

 - Copilot CLI if the plugin README's install steps are used
- Host permission for Bash or PowerShell, kubectl to the bound cluster, az for Azure evidence, the bundled scripts, and an approved artifact destination
- Explicit approval before a packet capture, and a further approval before a debug-container fallback or test traffic

### Compatibility

Copilot CLI

### Implementation

bash · powershell

### Local skill text; a capture starts only if an operator passes the stated gates

 - Read the skill text
- Read cluster and Azure state with existing az and kubectl credentials only if the operator runs those reads
- Start a packet capture, change resources, add a debug container, or generate traffic only after the approvals the skill and plugin README name

### Cost model

MIT; no capture, kubectl, or plugin install was run

04 / FOLLOW THE EVIDENCE

## The source trail.

Our notes are separate from the original resource. Check upstream before adopting a new version.

 - [aks-network-capture SKILL.md ↗](https://github.com/microsoft/skills/blob/fc164ba1d7a0c10377dbcc1c9ac07253b9329fdb/.github/plugins/aks-skills/skills/aks-network-capture/SKILL.md) Checked 2026-10-14 https://github.com/microsoft/skills/blob/fc164ba1d7a0c10377dbcc1c9ac07253b9329fdb/.github/plugins/aks-skills/skills/aks-network-capture/SKILL.md Supports: host gate, capture intent is not mutation consent, and no unapproved kubectl path
- [AKS skills plugin README ↗](https://github.com/microsoft/skills/blob/fc164ba1d7a0c10377dbcc1c9ac07253b9329fdb/.github/plugins/aks-skills/README.md) Checked 2026-10-14 https://github.com/microsoft/skills/blob/fc164ba1d7a0c10377dbcc1c9ac07253b9329fdb/.github/plugins/aks-skills/README.md Supports: no packet capture or resource change without explicit approval
- [Repository README ↗](https://github.com/microsoft/skills/blob/fc164ba1d7a0c10377dbcc1c9ac07253b9329fdb/README.md) Checked 2026-10-14 https://github.com/microsoft/skills/blob/fc164ba1d7a0c10377dbcc1c9ac07253b9329fdb/README.md Supports: MIT heading and the azure plugin install line
- [Repository LICENSE ↗](https://github.com/microsoft/skills/blob/fc164ba1d7a0c10377dbcc1c9ac07253b9329fdb/LICENSE) Checked 2026-10-14 https://github.com/microsoft/skills/blob/fc164ba1d7a0c10377dbcc1c9ac07253b9329fdb/LICENSE Supports: MIT License
- [AKS skills plugin LICENSE ↗](https://github.com/microsoft/skills/blob/fc164ba1d7a0c10377dbcc1c9ac07253b9329fdb/.github/plugins/aks-skills/LICENSE) Checked 2026-10-14 https://github.com/microsoft/skills/blob/fc164ba1d7a0c10377dbcc1c9ac07253b9329fdb/.github/plugins/aks-skills/LICENSE Supports: MIT License, same redistribution terms as the repository root
- [Pinned definition rechecked for the 2026-10-15 resource wave ↗](https://raw.githubusercontent.com/microsoft/skills/fc164ba1d7a0c10377dbcc1c9ac07253b9329fdb/.github/plugins/aks-skills/skills/aks-network-capture/SKILL.md) Checked 2026-10-15 https://raw.githubusercontent.com/microsoft/skills/fc164ba1d7a0c10377dbcc1c9ac07253b9329fdb/.github/plugins/aks-skills/skills/aks-network-capture/SKILL.md Supports: upstreamDescription, bestFor, review

KEEP COMPARING

## Other approaches to consider.

Related by category or shared topics. These are alternatives to inspect, not a measured quality order.

 [### AKS GPU inference ↗ Pins Microsoft's AKS GPU and KAITO diagnosis skill, which stays on read-only evidence unless scaling, drain, deletion, or add-on changes are separately authorized.](/skills/microsoft-aks-gpu-inference/)[### AKS troubleshooting ↗ Pins Microsoft's live AKS troubleshooting skill, which does not restart, delete, cordon, drain, scale, upgrade, or reconfigure a resource unless remediation is explicitly requested.](/skills/microsoft-aks-troubleshooting/)[### AI Runway AKS setup ↗ Pins Microsoft's AI Runway AKS setup skill, which requires confirmation before install, deployment, or GPU provisioning.](/skills/microsoft-airunway-aks-setup/)

 [AI Tools ↗](/tools/)[Skills ↗](/skills/)[Agents ↗](/agents/)[MCP Servers ↗](/mcp-servers/)[Workflows ↗](/workflows/)

## Continue your investigation

 - [Choose a toolkit](/tools/)
- [Inspect execution hosts](/agents/)
- [Check tool access](/mcp-servers/)
- [Check project dependencies](/check-repo/)
