---
title: "Grafana Cloud testing: review, setup & limitations · Undominated.ai"
canonical: https://undominated.ai/skills/grafana-testing/
description: "Pins Grafana's Cloud testing skill, which runs a local k6 smoke test before a cloud launch and pairs check creation with a rollback."
---

# Grafana Cloud testing: review, setup & limitations · Undominated.ai

> Pins Grafana's Cloud testing skill, which runs a local k6 smoke test before a cloud launch and pairs check creation with a rollback.

[← Explore all skills](/skills/)

SYNTHETIC AND LOAD TESTING / Grafana Labs

# Grafana Cloud testing

Pins Grafana's Cloud testing skill, which runs a local k6 smoke test before a cloud launch and pairs check creation with a rollback.

 [See setup guidance ↓](#setup)[Original source ↗](https://github.com/grafana/skills/tree/1ccacf29049fde66637fe01ab93a83a772da323b/skills/grafana-cloud/testing)

SOURCE REVIEW

 Reviewed 2026-10-15
 Evidence 4 linked sources
 Publisher Grafana Labs
 Licence [Apache-2.0 ↗](https://github.com/grafana/skills/blob/1ccacf29049fde66637fe01ab93a83a772da323b/LICENSE)
 Revision 1ccacf29049f
 [Read what was—and wasn’t—checked ↓](#review)

“Probe, load-test, and instrument frontends from Grafana Cloud. …”

 [Grafana Labs · upstream description ↗](https://github.com/grafana/skills/blob/1ccacf29049fde66637fe01ab93a83a772da323b/skills/grafana-cloud/testing/SKILL.md) Our analysis follows below.

01 / THE REASONING

## Why this made the selection.

 - No selected skills record uses this source path.
- The file requires a local k6 smoke run before the cloud launch, and it names delete or disable as the rollback for a synthetic check.

### A good fit for

 - Adding a Grafana Cloud synthetic check or k6 cloud run only after a local smoke test, with delete or disable named as the check rollback
- Follow a Faro test event from collector acceptance to observable session or log data.

### Weigh up before choosing

 - This review did not execute the resource.
- claude plugin install grafana-cloud@grafana-skills installs the grafana-cloud plugin group, not this file alone. npx skills add grafana/skills is also in the README and can install more than this file. Neither command was run.
- The file says the local smoke run has no cloud cost and states a probe count, a wait before the first probe, and example thresholds. This review did not measure cost, did not count probes, and does not adopt those thresholds.
- references/synthetic.md, references/synthetic-monitoring.md, references/k6-and-faro.md, and references/k6-cloud.md were not opened.
- Scripted and browser check authoring is deferred to synthetic-monitoring-checks. That skill was not in this wave and was not fetched.

02 / THE REVIEW RECORD

## What we actually inspected.

Source review has boundaries. A clear record is more useful than a “safe” badge.

### Material inspected

 - skills/grafana-cloud/testing/SKILL.md
- README.md
- LICENSE

### Our findings

 - The k6 workflow authenticates with a cloud token, then requires a local one-VU smoke run before the cloud launch.
- The file says that local step has no cloud cost. The cloud launch is a separate command after it.
- A synthetic check is created with a bearer token that the prerequisites scope as sm:write. The same workflow names a rollback that deletes the check or sets enabled to false.
- Faro verification treats HTTP 202 from the collector as accepted and HTTP 401 as an apiKey mismatch.
- The CI note says exit status 0 means the thresholds passed and exit status 99 means a threshold failed. Those codes were not produced here.
- Faro verification distinguishes collector HTTP acceptance from finding the test event in the session UI or Loki, with separate trace lookup in Tempo.

### Not established by this review

 - The resource was not executed and its tools were not called.
- k6 was not logged in and no local or cloud run was started.
- No synthetic check was created, deleted, or disabled.
- The synthetic, k6, and Faro reference files were not opened.
- Not executed: it was not installed or run.

The review applies to the material and revision named here. A newer upstream release can change its behavior.

03 / PUT IT TO WORK

## Add a skill to your workflow.

[Upstream setup instructions ↗](https://github.com/grafana/skills/blob/1ccacf29049fde66637fe01ab93a83a772da323b/README.md)

DOCUMENTED COMMAND

 claude plugin install grafana-cloud@grafana-skills Copy command ↗

Copying does not execute this command. It may retrieve a newer version than the reviewed source.

 - The README Claude Code section shows claude plugin marketplace add grafana/skills and then claude plugin install grafana-cloud@grafana-skills.
- That command installs the grafana-cloud plugin group. This file is skills/grafana-cloud/testing/SKILL.md.
- npx skills add grafana/skills is also in the README and can install more than this file. The only --skill example names frontend-session-rca, not this skill.
- This review did not run either install.

### Before you start

 - Claude Code if the recorded plugin command is used
- A skills host if npx skills add grafana/skills is used instead
- An sm:write token, a k6 cloud token, or a Faro write token only if those workflows are followed, which this review did not do

### Compatibility

Claude Code · Cursor · Codex · skills CLI

### Implementation

javascript · shell

### Grafana Cloud testing tokens stay with the operator

 - Read the skill
- Run a local k6 smoke test before a cloud launch
- Delete or disable a synthetic check only as the file's rollback, which this review did not do

### Cost model

Apache-2.0; no check was created and no load test was launched

04 / FOLLOW THE EVIDENCE

## The source trail.

Our notes are separate from the original resource. Check upstream before adopting a new version.

 - [testing SKILL.md ↗](https://github.com/grafana/skills/blob/1ccacf29049fde66637fe01ab93a83a772da323b/skills/grafana-cloud/testing/SKILL.md) Checked 2026-10-14 https://github.com/grafana/skills/blob/1ccacf29049fde66637fe01ab93a83a772da323b/skills/grafana-cloud/testing/SKILL.md Supports: local smoke run before cloud launch and synthetic rollback
- [Repository README ↗](https://github.com/grafana/skills/blob/1ccacf29049fde66637fe01ab93a83a772da323b/README.md) Checked 2026-10-14 https://github.com/grafana/skills/blob/1ccacf29049fde66637fe01ab93a83a772da323b/README.md Supports: grafana-cloud plugin install line and Apache-2.0 statement
- [Repository LICENSE ↗](https://github.com/grafana/skills/blob/1ccacf29049fde66637fe01ab93a83a772da323b/LICENSE) Checked 2026-10-14 https://github.com/grafana/skills/blob/1ccacf29049fde66637fe01ab93a83a772da323b/LICENSE Supports: Apache License Version 2.0 and Copyright 2026 Grafana Labs
- [Pinned continuation review C2-W31 ↗](https://raw.githubusercontent.com/grafana/skills/1ccacf29049fde66637fe01ab93a83a772da323b/skills/grafana-cloud/testing/SKILL.md) Checked 2026-10-15 https://raw.githubusercontent.com/grafana/skills/1ccacf29049fde66637fe01ab93a83a772da323b/skills/grafana-cloud/testing/SKILL.md Supports: review.findings, bestFor, upstreamDescription

KEEP COMPARING

## Other approaches to consider.

Related by category or shared topics. These are alternatives to inspect, not a measured quality order.

 [### Grafana Cloud Application Observability ↗ Pins Grafana's app observability skill, which requires publisher scopes and treats Faro 401 and 404 as different failures.](/skills/grafana-app-observability/)[### Grafana Cloud Cost Management ↗ Pins Grafana's cost-management skill, which says to preview Adaptive Metrics rules before apply and to disable or delete them to roll back.](/skills/grafana-cost-management/)[### Grafana Cloud k6 investigation ↗ Pins Grafana's Cloud k6 investigation skill, which reads with authenticated gcx and forbids using the script-update command as a way to discover URLs.](/skills/grafana-k6-cloud-investigate-test/)

 [AI Tools ↗](/tools/)[Skills ↗](/skills/)[Agents ↗](/agents/)[MCP Servers ↗](/mcp-servers/)[Workflows ↗](/workflows/)

## Continue your investigation

 - [Choose a toolkit](/tools/)
- [Inspect execution hosts](/agents/)
- [Check tool access](/mcp-servers/)
- [Check project dependencies](/check-repo/)
