---
title: "Grafana OnCall and IRM: review, setup & limitations · Undominated.ai"
canonical: https://undominated.ai/skills/grafana-oncall-irm/
description: "Pins Grafana's OnCall and IRM skill, which previews a routing template before a live alert and authenticates schedule calls with a token."
---

# Grafana OnCall and IRM: review, setup & limitations · Undominated.ai

> Pins Grafana's OnCall and IRM skill, which previews a routing template before a live alert and authenticates schedule calls with a token.

[← Explore all skills](/skills/)

ON-CALL ROUTING / Grafana Labs

# Grafana OnCall and IRM

Pins Grafana's OnCall and IRM skill, which previews a routing template before a live alert and authenticates schedule calls with a token.

 [See setup guidance ↓](#setup)[Original source ↗](https://github.com/grafana/skills/tree/1ccacf29049fde66637fe01ab93a83a772da323b/skills/grafana-cloud/oncall-irm)

SOURCE REVIEW

 Reviewed 2026-10-15
 Evidence 4 linked sources
 Publisher Grafana Labs
 Licence [Apache-2.0 ↗](https://github.com/grafana/skills/blob/1ccacf29049fde66637fe01ab93a83a772da323b/LICENSE)
 Revision 1ccacf29049f
 [Read what was—and wasn’t—checked ↓](#review)

“Route alerts, run on-call rotations, and drive incidents in Grafana IRM / OnCall …”

 [Grafana Labs · upstream description ↗](https://github.com/grafana/skills/blob/1ccacf29049fde66637fe01ab93a83a772da323b/skills/grafana-cloud/oncall-irm/SKILL.md) Our analysis follows below.

01 / THE REASONING

## Why this made the selection.

 - No selected skills record uses this source path.
- The file requires a routing-template preview before the live alert, and schedule calls send an Authorization token.

### A good fit for

 - Wiring Alertmanager to Grafana IRM when the route is previewed before a live alert and schedule reads use a token
- Check first-match route selection when multiple alert conditions can match.

### Weigh up before choosing

 - This review did not execute the resource.
- claude plugin install grafana-cloud@grafana-skills installs the grafana-cloud plugin group, not this file alone. npx skills add grafana/skills is also in the README and can install more than this file. Neither command was run.
- Best practices say to keep chains to four levels or fewer. The worked example lists six numbered steps, two of which are waits, and says to watch steps 1 through 6. This review did not treat a wait as a level and did not create a chain.
- The file says OnCall OSS was archived in March 2026. That date was not checked against another repository.
- references/integrations.md and references/templates-schedules.md were not opened. The file's alert-appearance timing was not measured.

02 / THE REVIEW RECORD

## What we actually inspected.

Source review has boundaries. A clear record is more useful than a “safe” badge.

### Material inspected

 - skills/grafana-cloud/oncall-irm/SKILL.md
- README.md
- LICENSE

### Our findings

 - The routing template is previewed in the integration UI before the route is treated as live, and a false result means the Jinja expression is fixed and previewed again.
- The live check is a separate test alert after that preview. The Alertmanager webhook in the file sets send_resolved so a resolved alert can auto-resolve the group.
- Schedule creation and the who-is-on-call read both send an Authorization token header. The file does not include a token value.
- The file says OnCall OSS is in maintenance mode, names a March 2026 archive, and tells Grafana Cloud users to use IRM while keeping the same chain, schedule, and integration concepts.
- Integrations and schedules are assigned to teams for RBAC. Slack chatops needs a workspace admin to install the OnCall app.
- The route concept uses the first true Jinja2 condition to select an escalation chain, so route order is part of the routing behavior described by the source.

### Not established by this review

 - The resource was not executed and its tools were not called.
- No schedule was created and no test alert was sent.
- The integration and template references were not opened.
- The OnCall OSS archive date was not checked against another repository.
- Not executed: it was not installed or run.

The review applies to the material and revision named here. A newer upstream release can change its behavior.

03 / PUT IT TO WORK

## Add a skill to your workflow.

[Upstream setup instructions ↗](https://github.com/grafana/skills/blob/1ccacf29049fde66637fe01ab93a83a772da323b/README.md)

DOCUMENTED COMMAND

 claude plugin install grafana-cloud@grafana-skills Copy command ↗

Copying does not execute this command. It may retrieve a newer version than the reviewed source.

 - The README Claude Code section shows claude plugin marketplace add grafana/skills and then claude plugin install grafana-cloud@grafana-skills.
- That command installs the grafana-cloud plugin group. This file is skills/grafana-cloud/oncall-irm/SKILL.md.
- npx skills add grafana/skills is also in the README and can install more than this file. The only --skill example names frontend-session-rca, not this skill.
- This review did not run either install.

### Before you start

 - Claude Code if the recorded plugin command is used
- A skills host if npx skills add grafana/skills is used instead
- An IRM or OnCall API token only if a schedule call is made, which this review did not do

### Compatibility

Claude Code · Cursor · Codex · skills CLI

### Implementation

shell · yaml

### Grafana Cloud IRM token for schedule calls

 - Read the skill
- Preview a route before sending a live alert
- Create or read a schedule only with the operator's token

### Cost model

Apache-2.0; no schedule was created and no alert was sent

04 / FOLLOW THE EVIDENCE

## The source trail.

Our notes are separate from the original resource. Check upstream before adopting a new version.

 - [oncall-irm SKILL.md ↗](https://github.com/grafana/skills/blob/1ccacf29049fde66637fe01ab93a83a772da323b/skills/grafana-cloud/oncall-irm/SKILL.md) Checked 2026-10-14 https://github.com/grafana/skills/blob/1ccacf29049fde66637fe01ab93a83a772da323b/skills/grafana-cloud/oncall-irm/SKILL.md Supports: preview before live routing and token on schedule calls
- [Repository README ↗](https://github.com/grafana/skills/blob/1ccacf29049fde66637fe01ab93a83a772da323b/README.md) Checked 2026-10-14 https://github.com/grafana/skills/blob/1ccacf29049fde66637fe01ab93a83a772da323b/README.md Supports: grafana-cloud plugin install line and Apache-2.0 statement
- [Repository LICENSE ↗](https://github.com/grafana/skills/blob/1ccacf29049fde66637fe01ab93a83a772da323b/LICENSE) Checked 2026-10-14 https://github.com/grafana/skills/blob/1ccacf29049fde66637fe01ab93a83a772da323b/LICENSE Supports: Apache License Version 2.0 and Copyright 2026 Grafana Labs
- [Pinned continuation review C2-W21 ↗](https://raw.githubusercontent.com/grafana/skills/1ccacf29049fde66637fe01ab93a83a772da323b/skills/grafana-cloud/oncall-irm/SKILL.md) Checked 2026-10-15 https://raw.githubusercontent.com/grafana/skills/1ccacf29049fde66637fe01ab93a83a772da323b/skills/grafana-cloud/oncall-irm/SKILL.md Supports: review.findings, bestFor, upstreamDescription

KEEP COMPARING

## Other approaches to consider.

Related by category or shared topics. These are alternatives to inspect, not a measured quality order.

 [### Grafana alerting and IRM ↗ Pins Grafana's alerting and IRM skill, which requires a bearer token, checks the receiver before live routing, and silences notifications without stopping evaluation.](/skills/grafana-alerting-irm/)[### Grafana Cloud Cost Management ↗ Pins Grafana's cost-management skill, which says to preview Adaptive Metrics rules before apply and to disable or delete them to roll back.](/skills/grafana-cost-management/)[### Cloudflare Sandbox next ↗ Pins Cloudflare's sandbox-next skill, which stops on the stable package, refuses a mixed preview image, and keeps live credentials in the Worker.](/skills/cloudflare-sandbox-next/)

 [AI Tools ↗](/tools/)[Skills ↗](/skills/)[Agents ↗](/agents/)[MCP Servers ↗](/mcp-servers/)[Workflows ↗](/workflows/)

## Continue your investigation

 - [Choose a toolkit](/tools/)
- [Inspect execution hosts](/agents/)
- [Check tool access](/mcp-servers/)
- [Check project dependencies](/check-repo/)
